• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOUND Convertible top pin receptacle for 1965 Belvedere II

Status
Not open for further replies.

kiwigtx

Henchman #4 and Jack-Stand Racer #2
Staff member
FBBO Gold Member
Local time
9:36 PM
Joined
Jun 12, 2012
Messages
35,629
Reaction score
95,979
Location
NZ - just short of the South Pole
Feedback: 26 / 0 / 0
Hi guys,
I don't know the correct terminology for the part I am looking for - for my buddy's 1965 Plymouth Belvedere II convertible windshield.

It's a plastic oval-shaped bung that fits inside the top of the windshield frame, and accepts the pins for the roof - locking it in place.

Sadly, one has fallen out due to age...there is a screw inside apparently, and that must have been loose. If anyone has a lead as to where to source this, or has some new ones available, please let me know here.

Thanks,
Roger

:xscuseless:

20210306_131738.jpg
20210306_131743.jpg
20210306_131756.jpg
20210306_131816.jpg
 
The pictures above show the driver side is missing....I assume they are both the same - could use a pair if available. :thumbsup:
 
Status
Not open for further replies.
Auto Transport Service
Back
Top