B5 70 r/r
Member
Hi,I’m restoring 1970 Plymouth R/R.Non a/c Non p/s.4 speed,22inch radiator.I’m using 71 cuda 383 block.Would anyone know correct diameter and amount of belts for pulley on crank and water pump.Cheers Ian
Correct 383 pulleys
- Thread starter B5 70 r/r
- Start date
- Local time
- 6:23 PM
- Joined
- Dec 31, 2020
- Messages
- 6,636
- Reaction score
- 14,567
- Location
- Ontario, Canada
Power steering?
SlinktRR
Well-Known Member
https://www.bouchillonperformance.com/products-pulleys
Use this site to search, they have the ID/OD for most pulleys with applicable years.
I used a 71 cuda 383 for my 70 roadrunner at one time and the same pulleys worked out fine except for the crank, the cuda had AC so I had to get a non-ac from bouchillon.
Use this site to search, they have the ID/OD for most pulleys with applicable years.
I used a 71 cuda 383 for my 70 roadrunner at one time and the same pulleys worked out fine except for the crank, the cuda had AC so I had to get a non-ac from bouchillon.
Similar threads
