Breaker-1
Well-Known Member
Very clean, unmodified, Has light surface rust only, no pitting. Has 4:10 gears installed.
Comes with the following:
Second set of gears - 3:54.
New bearings in the box.
New pinion snubber.
New brake drums.
The original yoke.
The backing plates have been cleaned and coated before I bought them years ago and will need to be done again, coating is flaking off. The 4:10 ring gear has some very light surface rust on a couple of teeth from light moisture but should clean up just fine. Pictures show date codes & material numbers.
This is a very nice set up in very clean condition. A nice piece for any restoration.
Located in Cleveland TN. 37312
$3300.00 for all..... OBO
Comes with the following:
Second set of gears - 3:54.
New bearings in the box.
New pinion snubber.
New brake drums.
The original yoke.
The backing plates have been cleaned and coated before I bought them years ago and will need to be done again, coating is flaking off. The 4:10 ring gear has some very light surface rust on a couple of teeth from light moisture but should clean up just fine. Pictures show date codes & material numbers.
This is a very nice set up in very clean condition. A nice piece for any restoration.
Located in Cleveland TN. 37312
$3300.00 for all..... OBO
Last edited by a moderator:
