door jamb switches

[74roadrunner440]

im looking for door jamb switches for a 73, and a 74 road runner the only difrence between the two are on 73 they used a bullet type conector and the driveres side used a dual spade type the problem is that the threads are 1/2 inch thick and corse threads if any one has these or know where to get them i would like to find out the part #s also for both cars thanks again every one for your help u can email me or call me at 701 626 1844 thanks pat

 

[HitIt]

Check out Rock Auto. Mine were for a different year but that's where I got mine.

 

[74roadrunner440]

does any one know where u can find the right switches w 1/2" threads corse threads? and a part# would be nice if any one knows it plz let me know thanks pat

 

[Audey]

I know this is an older post, but did you ever find a switch? I ordered one from rock auto, and it is the smaller one. I need the larger switch also.

 

[Nacho-RT74]

From the 3rd gen charger board:

Hot tip off the day:

The OEM door jamb switch from a 1996 Chevy G30 Van is the correct thread (1/2" x 20) and will replace the driver's side switch (2 terminal). Worked for mine!

 

[Audey]

That's good to know. I found an old wiring harness that I had for 70 dart, and it had the larger threaded double spade switch on it