• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Drip rail and roof seal

rrTor-Red

FBBO Gold Member
FBBO Gold Member
Local time
8:53 PM
Joined
Sep 1, 2010
Messages
2,313
Reaction score
859
Location
USA
On a 71 B, looking at the manual, do I get this right that the drip rail goes on before the roof seal? Does the anti-rattle clip go on in between the two? Thanks!
 
drip rail? I guess you meant the roof rail mold. It gets a foam sticked seal between mold and roof, attached to mold. yes, the anti rattle clip is between roof rail weatherstrip and mold
C75C4C2C-A3F2-475C-94E2-D304E5BCF80D.jpeg
 
drip rail? I guess you meant the roof rail mold. It gets a foam sticked seal between mold and roof, attached to mold. yes, the anti rattle clip is between roof rail weatherstrip and moldView attachment 1442880
So you're saying the foam seal goes on, then the mold, anti-rattle clip, then the weatherstrip?
 
yeap, the foam seal goes between sheetmetal and mold, but attached/glued to mold, not to sheetmetal. Is a single side face foam tape

81HBnfaHjRL.jpg
 
I see it now in the manual. Thanks Nacho!
 
Auto Transport Service
Back
Top