Eddy Head ??

[Bens69PlymouthSatellite]

I was curious if you could elaborate on a fact or fiction question,will edelbrock heads warp easier than a cast iron head,and can I remove them safely to do future work to my 440 or will they be junk if I torque them and have to take them off in the future and torque them back on?

 

[rumblefish360]

IF you take the heads off when there hot, they can warp.

While on the car, they should not ever warp. Warpage is due to over heating of the head/engine. Being that aluminum expands quicker than iron, the use of a good and proper head gasket to allow the different growth rates should be used.

 

[65-440]

you should be able to take them off as often as you like. there is no maximum amout of times you can torque the heads !