wish4hemi
Well-Known Member
Contact seller
Edelbrock CH4B aluminum intake for RB (413/426/440) wedge engines. Good shape. The CH4B is no longer produced, but is sought after because it was basically an updated, aluminum version of the factory cast iron intake. It will also fit under most hoods without a drop-base air cleaner (unlike the Edelbrock Performer RPM). The CH4B design was also used in the 1969 Bee-Liever package (parts book screenshot attached).
It looks like the front two outer bolt holes have been Heli-Coiled in the past. Both hold threads, but one might need redone in the future as the top couple of threads are chipped off (shown in picture). However, I was able to get a bolt threaded into every hole.
$195 plus shipping from 62448. I do accept PayPal.
It looks like the front two outer bolt holes have been Heli-Coiled in the past. Both hold threads, but one might need redone in the future as the top couple of threads are chipped off (shown in picture). However, I was able to get a bolt threaded into every hole.
$195 plus shipping from 62448. I do accept PayPal.