cal30_sniper
Well-Known Member
I’ve got a nice Edelbrock TM6 manifold I’m not going to end up using. Bought for a stroker build before I decided to go Gen III HEMI.
When the bolt head bumps are welded up and the runners ported back out, these are the best flowing of the single planes that will fit under the hood. Better even than the street dominator.
Front coil bracket bolt has some damaged threads. It will still hold a bolt, but needs a helicoil or drilled and tapped up to the next size. All else looks great.
$275 plus the ride from Albuquerque, NM.
When the bolt head bumps are welded up and the runners ported back out, these are the best flowing of the single planes that will fit under the hood. Better even than the street dominator.
Front coil bracket bolt has some damaged threads. It will still hold a bolt, but needs a helicoil or drilled and tapped up to the next size. All else looks great.
$275 plus the ride from Albuquerque, NM.
