WTB Edelbrock torker2 intake manifold for 440

[Moose440]

Anyone have a edelbrock torker 2 for A 440 there willing to part with.

 

[QuickBpBp]

I have one. Only thing I see is that the engine it was on had the bolt holes ovaled out from the heads being cut/block decked.. Sold the engine kept the intake.. Let me know any interest..

 

[66Satellite47]

Ovaled head bolt holes are not a big deal. Use the correct size washers to get the tight fit. All depends on how the ports line up. I always checked mine with a bent coat hanger to check the fit of the port at the head.

 

[QuickBpBp]

I will post some pics..

 

[QuickBpBp]

Sorry it’s just a Torker not ll.

 

[66Satellite47]

That appears to be a 2nd gen Torker. Torker II was the next gen as I recall. All are real good manifolds. Although I was always a Tarantula guy. I believe the single plane manifolds were much better on street combos than were ever given credit for.

 

[Moose440]

I have one. Only thing I see is that the engine it was on had the bolt holes ovaled out from the heads being cut/block decked.. Sold the engine kept the intake.. Let me know any interest..

Sent a pm

 

[lemondana]

I have a real nice one. Let me see if I can dig it out and get some pictures.