Edelbrock " VICTOR " Heads Over 700 HP !

[moparcrazy]

Wow what a grate article, make over 700 HP !


http://www.hotrod.com/how-to/engine/116-0705-edelbrock-heads/

 

[The Horvaths]

In reverse gear, the whole planet would spin about you

 

[moparcrazy]

Dude Exactly !! my same thoughts !!!

In reverse gear, the whole planet would spin about you

 

[Scooby67]

Wow what a grate article, make over 700 HP !


http://www.hotrod.com/how-to/engine/116-0705-edelbrock-heads/

Great, not grate.

 

[dvw]

Still looking for someone who has made passes with these heads. I'd like to see how quick the cars are compared to -1's.
Doug

 

[Scooby67]

I have them on my 492 stroker in my 65 Belvedere, but have not made any passes as of yet.

 

[moparcrazy]

oops ! Thanks !!

Great, not grate.

- - - Updated - - -

scooby67 did ya get this thing dynode ?! if so what kind of numbers did it make ...Thanks !!

I have them on my 492 stroker in my 65 Belvedere, but have not made any passes as of yet.

 

[Scooby67]

oops ! Thanks !!


- - - Updated - - -

scooby67 did ya get this thing dynode ?! if so what kind of numbers did it make ...Thanks !!

Dynoed at 630HP and 620TQ. 10.5:1 compression, 576/545 solid cam, Victor intake and heads, 1000CFM Holly carb

 

[IQ52]

Victor heads on a 500 stroker, single Dominator, normally aspirated, 657 LB-FT and 845 HP.

 

[dvw]

Victor heads on a 500 stroker, single Dominator, normally aspirated, 657 LB-FT and 845 HP.

That sounds pretty good. Intake,cam,compression? Were you able to get enough spring on it to run RPM? How quick is the car?
Doug

 

[moparcrazy]

Very Impressive !! I'm Still gathering parts but when im ready, I'll Hit You Up ! Thanks for your input !

Victor heads on a 500 stroker, single Dominator, normally aspirated, 657 LB-FT and 845 HP.

 

[IQ52]

Very Impressive !! I'm Still gathering parts but when im ready, I'll Hit You Up ! Thanks for your input !

So you're going 451? Were you planning on Victor heads? Here are some 451 engines in a dyno contest with Edelbrock RPM heads..........

http://www.hotrod.com/events/coverage/mopp-1003-2009-amsoil-mopar-muscle-engine-challenge-winners/

 

[Jeremiah]

Still looking for someone who has made passes with these heads. I'd like to see how quick the cars are compared to -1's.
Doug

I'm working on it! The corporation has has been beating us into the ground with 70 hour weeks and Southern Oregon machine shops are RETARDED! I just finished my dyno headers (nobody had a set) so we shall see in what manner I have to hold the shop's hand next lol. Merry Christmas Doug and family, I have really enjoyed watching you and Dizuster's progress this year.


I also have a G Force GF5R on the way which will cut Lenco Racing Transmissions out of the equation, helping progress greatly!