• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

finally making real progress 63 dodge

bob myers

Well-Known Member
Local time
3:33 PM
Joined
Dec 8, 2009
Messages
163
Reaction score
96
Location
south dakota
My 63 Dodge project has been sporadic due to lots of reasons and excuses. For two weeks now I have worked steadily and really making headway. I believe I will be able to smell smoke in 5-7 days. Here are the quick details and what I have done in those two weeks:

Install long rear wheel studs
Insulate interior
Remove tank, paint and put in 3/8 pickup
Bend all fuel 3/8 lines and install.
Add fluid to dry brake system, bleed and adjust
Install engine and wire new ignition, elec fans etc.
install intake and exhaust manufolds
Install carbs, linkage, fuel lines
Install alternator, power steering and all lines/fittings.

Sure doesn`t look like much on that list, but it`s all done right. Here`s a few pics of the project.
 

Attachments

  • dodge pic.jpg
    dodge pic.jpg
    68.3 KB · Views: 457
  • dodge pic 1.jpg
    dodge pic 1.jpg
    74.5 KB · Views: 468
  • dodge pic 2.jpg
    dodge pic 2.jpg
    68.7 KB · Views: 451
  • dodge pic 3.jpg
    dodge pic 3.jpg
    72.7 KB · Views: 440
  • dodge pic 5.jpg
    dodge pic 5.jpg
    76.6 KB · Views: 441
Very nice! I had a 63 Polara when I was in high school. Still like em.
 
man you sure got lots done in a short time ! Nice car to boot ! !
 
nice job looks great i really like those early b bodies thanks for the pics and keep us posted
 
Nice,!

I'd give my left AND right you know what for a 63 Dodge,

Lookin' good!
 
Thanks for this "post" Bob!
You have given me some inspiration again to get my 63 project going.
(very bad body-shop experience...)

"Super-bee_ski"
 
63 dodge one of my favorites and looks to be well done!
 
So today the progress continues with:

Mount and install radiator and elec fans
Install all fuel lines and filters
Fabricate and Install power steering hoses...really close to exhaust manifold
Install dist cap and and plug wires
Fabricate and install trans cooler lines

Another short list, but it took most of the day
 

Attachments

  • max engine.jpg
    max engine.jpg
    86.8 KB · Views: 281
  • max engine 1.jpg
    max engine 1.jpg
    80 KB · Views: 302
Last edited:
Auto Transport Service
Back
Top