Firm Feel Rant

[Don selleck]

I'll have to check, I have a Cuda, so hopefully they mighty carry them thank you.

 

[OneWheelPeel]

So 99% of me wants to just ignore Matt, he should have thought about this before he burnt that bridge. The other 1% wants those upper control arms. What would you do?

If it was me I would not buy from him, I would rather get familiar with some of the more custom sites to make tubular arms rather than support his behavior. I’m stubborn that way and also don’t feel the apology is out of the kindness of his heart.

 

[RemCharger]

The only reason he probably won’t lose the entire sale from me is some things he makes, I can’t get from anybody else. If I could I already would have. I’ll definitely post an update of how any transactions go with him after his apology. I definitely won’t be paying $100 to get in front of the line.

I can't believe someone just wrote this on the public internet. But hope you find peace with the parts you search. Or are owed somehow

 

[1 Wild R/T]

I'll have to check, I have a Cuda, so hopefully they mighty carry them thank you.

@Don selleck
Why not put an original bar on it?

 

[RR Fan Dan]

I can't believe someone just wrote this on the public internet.

What did I write that was so bad?

 

[RR Fan Dan]

I would rather get familiar with some of the more custom sites to make tubular arms rather than support his behavior.

Magnum Force is the only other possibility for 73/74 and there is post FABO about how bad they are. Peter at Bergmans Auto also told me to stay away from them.

I’m stubborn that way and also don’t feel the apology is out of the kindness of his heart.

I do believe also that his apology was more self serving than out of the kindness of his heart. I am also stubborn, some people even go far as to call me an asshole.

 

[Don selleck]

@Don selleck
Why not put an original bar on it?

Haven't seen one for a 70 AAR, unsure what other ones may fit. a 8 3/4 is a 8 3/4, but unsure of the frame rail position comparison on other mopars

 

[Don selleck]

What did I write that was so bad?

maybe that's Matt.

 

[RR Fan Dan]

Seriously, I thought that too.

 

[1 Wild R/T]

Haven't seen one for a 70 AAR, unsure what other ones may fit. a 8 3/4 is a 8 3/4, but unsure of the frame rail position comparison on other mopars

Haven't seen one for a 70 AAR, unsure what other ones may fit. a 8 3/4 is a 8 3/4, but unsure of the frame rail position comparison on other mopars

71-74 E bodies could be optioned with "Special Handling" those cars use the same bars...

 

[OneWheelPeel]

Magnum Force is the only other possibility for 73/74 and there is post FABO about how bad they are. Peter at Bergmans Auto also told me to stay away from them.

I do believe also that his apology was more self serving than out of the kindness of his heart. I am also stubborn, some people even go far as to call me an asshole.

I get what you are saying, I meant a site like the one I'll link below to make em from scratch. Extreme I know but get me pissed enough...
https://www.joesracing.com/products/suspension/a-arms/components-fabrication/ (this is just from a quick search, I haven't looked for this kind of stuff in a long time)
I'd have to take awhile to educate myself and I know it may not just work if you need to get your car on the road. Luckily for me I am ok with the floppy arms on my car.

Imagine if someone saw a site like above and started a little business to compete with FF

 

[c body convert]

That was one of the things I could get elsewhere. Did you check ADDCO website directly? They actually sell two different size rear sway bars for my 74.

idk about your B bodies but the sway bars that mount behind the axle hit TTI exhausts on the C's so you need the ones that look like the factory ones with the hump in them

 

[f569]

I was a dick to the kid for a reason, I started a business over 30 years ago, I saw the spoiled bosses son's run many of them into the ground. I was harder on my son more than anyone else in my company. he quit a few times because I told him he will not be the bosses son, he tried pulling off dumb chit, stopped that program on the spot, even ran him off the job a couple times. He went to work for other people several times, saw the other side of the coin. He now runs the workers and deals with the supers on the job, I pay him half the profits straight up, been about 8 years now our profit margin is higher than its ever been, His self esteem has skyrocketed and so has his bank account, and best of all I actually get to goof a little and enjoy whats left of my life and he will inherit a business that allows him to get the most out of life. So Matt were pulllin for ya! .

I started a business over 30 years ago, I saw the spoiled bosses son's run many of them into the ground

I wish I could like this post 10 freakin' times!!