FOR SALE Fresh 440 with aluminum heads

[rick68b5]

Ok guys I have a rebuilt 440 that I'm not going to use anymore build sheet follows

Mid 70s 440 block .040 over
Kb 184-40 pistons
Forged .010/.010 crank
Factory rods
All balanced rotating assembly
Racer brown hemi grind cam
Speed master aluminum heads
Hemi oil pan with windage tray
high volume oil pump
Clevite bearings
I have new harland and sharp roller rockers that go with it but I had the wrong push rods so it will need 5/16 pushrods

$5500 for everything can deliver to Carlisle if paid for

 

[Gary Masse]

Can you post a picture of the block cast date, s/n and the stamping on the top just aft of the water pump.

 

[rick68b5]

Harland and sharp rockers were sold but I buttoned it up the other day