Gauge Cluster - 1968 Dodge Coronet - I have a broken one.

[fmontez1]

I have a 68 dodge coronet with a nice looking gauge cluster that doesn't work. Who rebuilds them, where can I get one? How much should i look to get for my used one?

Today on the way to work, I made a right turn, and the green right turn light started blinking. . . . . . SO some of it works. . . just looking to get a nicely rebuilt one. . . or a good functional used one.

thanks!

 

[fmontez1]

Eesh, the lack of response on here, and the prices at Ebay, are scary!!!

Dang hope I can find one cheap. I'd hate to have to put a panel and some aftermarket gauges in.

 

[696969]

fmontez, I have a dash on my '69 Satellite that was all but dead, aside from the speedo, and even that was off. I think I did a pretty good job in getting most of it to work just fine. It can be a few different things. Corroded dirty contacts, bad fuses, dead panel lights, fried board or regulator.

I'm actually in Los Angeles. If you're local, which it looks like you are, let me know if you need any help.

 

[fmontez1]

PM Sent!

fmontez, I have a dash on my '69 Satellite that was all but dead, aside from the speedo, and even that was off. I think I did a pretty good job in getting most of it to work just fine. It can be a few different things. Corroded dirty contacts, bad fuses, dead panel lights, fried board or regulator.

I'm actually in Los Angeles. If you're local, which it looks like you are, let me know if you need any help.

 

[696969]

Any progress?

 

[fmontez1]

Hello!

None, other than looking through the Shop manual. Looks like a lot of learning. . . it's gonna be a while before I can really tear into it, but i'm confident with the manual, and asking here, that I will be able to fix it myself, or at least find one and replace myself. I dont have a lot of electrical knowledge, but no time like the present to start.

 

[fmontez1]

UPDATE - Found one. All taken care of