Hello from Kc

[69rr6bbl]

After a recent purchase of a 69 383 4spd road runner that is ruff but not rusty and having little knowledge of mopar am sure to need some help, and some parts as well.
Thanks in advance and hallo to every one..

 

[Danomt]

Welcome from the Big Sky State

 

[Car Nut]

aboard!

 

[Budnicks]

welcome to FBBO

Love the 69 RR's

good luck with your new project, there's tons of knowledge here

 

[eric383]

Welcome, any pics?

 

[69rr6bbl]

Thanks guys i dont have experience with using forums so bear with me ill ask my kid for help,:argue: any ways the car has a 69 date code block and heads , 440 six pack and 4spd its a good start, but needs a full restoration so i will post up picks as its done..thanks again for the welcome..

 

[super-bee_ski]

Welcome aboard!
Thanks for the pics
Nice car!

And...thanks for joining the forum

 

[vetteman91]

Hello from a local Blue Springs guy. Nice car.

 

[aldal]

Great starting point :headbang: good luck on the build.

 

[69rr6bbl]

thank you... it has super solid floors and trunk thank god...i hate patching cars together..we had some issues with clutch peddle push in stick to floor never have i seen this.? and did some serching found car has 69 hemi 4 spd case at least and a 440 cuda bell for 10 inch clutch. as i said i am new to mopar so some learning curve is expected..any one know if this car should have 11 inch and large bell / will it matter.? i have the large bell housing came with parts but trans is not hub centric to opening on larger one..any advice greatly appreciated.again thanks for the welcome

 

[Car Nut]

Looks nice!

 

[mr. b]

welcome to FBBO keep us posted on your progress

 

[69rr6bbl]

tear down completed...off to media blaster..

 

[74moparmaniac]

Welcome to the addiction! Nice looking 6packccasion14:Best of luck with the R-Runner. Don't look at what you have, but look at what your going to have. ENJOY!!

 

[69rr6bbl]

Long time but made our move and back to work.!! hope to make much progress this month.

- - - Updated - - -

rt and left qt panels and floor replaced...:hello2:

- - - Updated - - -



- - - Updated - - -

 

[GetX'd]

Six Pack to go! Welcome to the site. You'll find a tremendous amount of support on this site. Come back early and often. The more updates with pics the better!

 

[Riverdawg]

Looks like a great project and your making great progress already. A belated welcome from MI. Keep the pics coming.

 

[Dreamcatcher]

Welcome.. There is another member in KC on this forum moparstuart great guy with a lot of knowledge. I believe last time I knew he also was working on a RR 4 speed car 69 or 70.

 

[69rr6bbl]

Thanks to all we are working hard to complete this car.!!

 

[69rr6bbl]

Hello its been a while we had to break off rr for a bit but have amd fenders and hood to get fitted and soon some prime..thank goodness..

- - - Updated - - -