Help identify transmission

[billy-jay]

Help decoding my transmission number…C 2408005. 0407556…this was stamped right above the pan on left side …stamped on the side of case ..2400066 tail shaft case 2400065..might have them reversed..and a plate on bottom of tail shaft where park lock would go…thanks

 

[MarkLevi]

Post these numbers and we'll be able to tell you what it is. Part number is first - usually "PK" and then 7 numerals "xxxxxxx" (occasionally with a trailing letter like "L"); followed by a 4-digit "xxxx" date code and another 4-digit "xxxx" daily build number.

M

 

[pnora]

Help decoding my transmission number…C 2408005. 0407556…this was stamped right above the pan on left side …stamped on the side of case ..2400066 tail shaft case 2400065..might have them reversed..and a plate on bottom of tail shaft where park lock would go…thanks

View attachment 1396319

View attachment 1396320

View attachment 1396321

Better recheck those pan rail numbers.

 

[R/T Boy 67]

1963 big block 727

 

[R413]

1963 B-body 361 engine

 

[MarkLevi]

Ahhh - I see. Thought OP was posting casting numbers. My bad.

 

[billy-jay]

Post these numbers and we'll be able to tell you what it is. Part number is first - usually "PK" and then 7 numerals "xxxxxxx" (occasionally with a trailing letter like "L"); followed by a 4-digit "xxxx" date code and another 4-digit "xxxx" daily build number.

M

View attachment 1396324

Yep that’s where they came from

 

[billy-jay]

It came out of a friends 63 Plymouth max wedge car…I didn’t know if it’s the original or not..should it have had the park lock on the tail shaft or not ?

 

[R/T Boy 67]

As noted above it is a 361 transmission, so it would not have been installed in a max wedge car from the factory. I know nothing about the park arrangement on cable shifted transmissions.