Holley SNIPER kickdown rod

[__Larsson____]

Okej, so i have adjusted the kickdown rod after i changed to sniper, the rod down behind the engine is adjusted to max and and it okey, but the rod that connects to the "carburetor" / EFI dosent reach the correct adjustment for the kickdown to work. How does you setup look like with your EFI?

 

[493 Mike]

Any rod can be modified or a cable style KD system can be used instead. Just be sure the levers on the trans and the throttle body are synchronized to obtain proper throttle pressure rise or risk burning the clutches.
Mike

 

[Dipstick]

You'll probably need a Mopar throttle lever extension made for a Holley or Edelbrock and a rod extension from Edelbrock.

https://www.summitracing.com/search...turer/edelbrock/throttle-cable-end-type/mopar