Hood pin location '70 GTX/RR

[Baller]

Hey guys, my GTX is not coded for hood pins, but they were added at one time. Does anyone have a factory diagram or other measurement for the proper locations (as if the car came down the line with them)? I think I'll keep them if they are in the correct area of the hood. Thanks.

 

[1970GTX]

Hey Baller, hope these photos help, (with apologies for photo quality)

 

[Baller]

Thanks a lot bud. I may just be able to make mine work. Wasn't looking forward to welding up the holes.

 

[Grabinov911]

Hey Baller, hope these photos help, (with apologies for photo quality)

Hey it's been a while since anyone thanked you for these photos: Thanks for the photos!

 

[kiwigtx]

Hey it's been a while since anyone thanked you for these photos: Thanks for the photos!

Thanks for bringing this to the top Grabinov911, and thank you for the photo information 1970GTX :headbang:

 

[Grabinov911]

For further reference. Hotchkis Hood Pins in a '70 Roadrunner, installed as above.

 

[lilred]

Any chance anyone is able to measure the hood pin location for a '70 Road Runner, here is a picture of my car and how a measurement from the corner of the hood to the center of the pin hole would give me the correct location from a factory equipped car, as mine were added at some point and are bit off from from side to side, also a measurement from the fender edge to center would be appreciated. Thank-you.

 

[Bird 426]

Question, the pins and holes are already in place, why would you want to alter that if they are off?