How do I remove a slant 6?? Bolt locations for chain.

[4mulas]

Sounds like a dumb question I know, but I have to yank a slant 6 out of my b body as I’ve sold it and I’ve never removed or installed one before. Where is a good place(s) to Bolt the chain to so it’s balanced and I don’t wreck stuff. It has a three speed manual attached to it so factor that into the equation too please. No intake or exhaust so there’s a fair amount of room.

It’s coming out the top, not dropping the k member

I need to do this tomorrow AM so any input so I don’t wreck my engine bay and so it comes out smoothly is appreciated!

Thank you!

 

[JimKueneman]

I have never done it but have read they are the most awkward SOB's to get out ever devised....

 

[Brandy]

Get a load leveler attachment so you can bring the front up and out. These pics show where to bolt to it. use two Grade 8 bolts. Blow the pics up and look closely. Good luck.

 

[Darter6]

Yep, what Ghostrider said. there are 2, 3/8'' threaded bosses on the top of the head.

 

[khryslerkid]

I thought you just jacked up the passenger side of the car so it would come straight up?

 

[Brandy]

" Yeah...that's old school stuff..." from the movie Blue Streak.