• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

How to Search for OEM Parts

Status
Not open for further replies.

marty mopar

Well-Known Member
Local time
10:44 AM
Joined
Nov 22, 2009
Messages
280
Reaction score
64
Location
tempe az
Feedback: 3 / 0 / 0
I have a parts business that I have been running for 40 years.
Here's what I do when I want to find a part.
Get the part number using a part book. These are available online,
in paper (dealership part books), Dealer Cd's or microfiche.
I have all the Mopar part books for car and trucks from 1929-2012 in
various forms. I have a CD downloaded on my computer from Chrysler
that has all the truck and car books from 1982-2012. After that year all
the part books were delivered to the dealers via internet so you have to
call the dealer to get that info.
If there is a part number on the part, you can use that too although
it may be a casting # and not the service # in the part book. Sometimes
numbers on parts are the number in the part book. If a part is an assembly
such as a taillamp that has a lens, gasket, bezel and housing then the numbers
on individual parts may be valid numbers but the lamp assembly will have a
different number.
Numbers often are superseded for various reasons such as vendor

change, design change, etc. There can be numerous changes some of which

may look the same as the OEM part and other times it might look different.

I have old COS books from Chrysler (Cancelled, Obsolete, Superseded) that

have all the old numbers that were "equivalent".


Numbers that are cancelled often come up as NS1 or something similar.

That means not serviced (as in obsolete or no longer available). At the

dealership the guys would say "NFG" or no fuXXing good)




Parts that were serviced in various colors may have the same casting numbers

but the part book shows different numbers for each color. These numbers

are color coded parts.


Example: Black is typically X and white is W


the last digit is how dark it is. 9 is the darkest and 1 is the lightest

Example:

EX9 is black black is always 9

DW1 is white white is always 1


The 1st alpa letter is often the year E is circa 1969-70 F is circa 1970-71.

The lettering system varies over the years.


1411EX9 is 1969 1404FX9 is 1970-71


other later models examples:


S690BL3 tan headrest sleeve 4018801 cast on part 1983-1984

S690DT3 tan headrest sleeve 4018801 cast on part 1985-1986


here the tan probably is a different shade but the casting # is the same


One way to find out what the status of a part # is to call my local dealership

and give them a number to see if superseded. If it is too old they will say it is

invalid which means Chrysler dropped it from their system. You might get

lucky and there will be a trail of old numbers associated with the part. Or it

goes to a specifier bulletin or has a recall # associated with it. I ask to see if

any dealers in the country stock it as all of them are tied into the dealer locate.

Sometimes there is some dealer that has it!


Let's say you still can't find it. Using Google or some other search engine put in

ALL of the OEM numbers including superseded ones and casting numbers this way:


3591016 Mopar (this is the number in the part book)



Or


3591020 Mopar (this is the casting number on the part)


If you just put a part # into a search w/o the word Mopar you are going to

get a crapload of stuff that has nothing to do with your part.


This will show you all the ads, E-Bay, forum posts, parts inventories, yard sales

aftermarket stuff, anytime it was in print and had these numbers in them.


There are 2 parts locators you can use if you have the OEM or casting numbers:


www.partsvoice.com


www.rearcounter.com


This is a good wrecking yard site for later models cars and once

in a blue moon something older (no part # needed):


www.car-part.com


When calling aftermarket sources (NAPA, Autozone, etc.) it is helpful

if you give them the OEM part number as they can crossover the # and

generally you get a better result.



The bottom line is to get a part # or you are pissing in the wind.
 
Part numbers are a way to save money on eBay. People list things by the number without doing research to find out what it fits.
 
@marty mopar I have a counter top parts catalogue rack and I'm looking for catalogues for my cars to put in it, particularly 68 and 74 cars and 78 and 83 trucks. I've seen pictures of bound catalogues. How long were these made and when did they switch to the big blue loose leaf binders? Will it work very well if I just put the loose leaf pages in the catalogue rack?

IMG_4500.jpg
 
Car#4 your in box is full

clear yours and send me a PM on this
 
Status
Not open for further replies.
Auto Transport Service
Back
Top