In need of a 1970 440 rear A/C bracket - pic enclosed
- Thread starter Ron Malmsten
- Start date
ykf7b0
Well-Known Member
I had something like that at one time but not sure if it would be the same. If I still have it, it is from a 1975 440 out of a New Yorker. I will try and take a look tonight for you.
Last edited:
Sixpactogo
Well-Known Member
Is it the cast iron piece or the stamped steel one? They used so many different bracket back in those days
1 Wild R/T
Well-Known Member
He's looking for the stamped steel bracket used from 68-72.. The 73 & up bracket is different... I have a couple 383 ones but gave the 440 one I had to a friend...
Ron Malmsten
Active Member
Yes the small rear bracket like in the photo at the top of the page
ykf7b0
Well-Known Member
I did look and I no longer have a bracket at all. It sounds like from previous posts' that what I had wouldn't work with your compressor anyway. I hope you find one soon!!
1 Wild R/T
Well-Known Member
That's the front bracket, He's looking for the rear bracket... The one with the red arrow pointing at it...
Sixpactogo
Well-Known Member
OK. Sorry.
1 Wild R/T
Well-Known Member
No reason to be sorry, you tried to help...
Ron Malmsten
Active Member
Yes thanks for the help i am still looking to purchase a 440 a/c bracket
1 Wild R/T
Well-Known Member
This bracket shouldn't be that hard to find.. It was used on 440's in C bodies too... So all those 68-72 C body donor engines sitting around likely still have the A/C compressor still bolted to the engine
Ron Malmsten
Active Member
i think 70 and71 only 68-69 is a bigger cast bracket
1 Wild R/T
Well-Known Member
Pretty sure the cast bracket is earlier.. I was working on a 68 Sport Fury recently, it had the same brackets as a 70-71..
Figure out what you need and start a wanted thread.
convx4
Active Member
For a friends 440 charger we could not find a rear RB ac bracket. So I took a 383 bracket and cut .750" out of it and re welded back where it fit. You could do the same.
Similar threads
- Locked
