Intake bolts

[Aron Gleason]

Just wondering if anybody in here has bought the 12 point intake bolts from 440 source? I know the factory bolts are good enough, but I wanted something a a little fancier.

 

[beanhead]

They are chinesium and perform accordingly....I used some 5ish years ago and they formed surface rust within a year. I just had to save that $10 on bolts though LOL

I'd recommend shelling out the extra $13 for the ARP set from the Summit. The 440 Source sells ARP sets as well but they are ridiculously over priced...
DODGE ARP 144-2101 ARP Chromoly Intake Manifold Bolt Kits | Summit Racing

 

[Black_Sheep]

ARP are not that expensive and the quality is unsurpassed…

 

[Aron Gleason]

They are chinesium and perform accordingly....I used some 5ish years ago and they formed surface rust within a year. I just had to save that $10 on bolts though LOL

I'd recommend shelling out the extra $13 for the ARP set from the Summit. The 440 Source sells ARP sets as well but they are ridiculously over priced...
DODGE ARP 144-2101 ARP Chromoly Intake Manifold Bolt Kits | Summit Racing

Thanks beanhead. Did you have to cut them down? I have the m1 intake.