WTB Looking for a 10.5 bellhousing for a 383-440

[Richard Sylstra]

Looking for a 10.5" bellhousing for our test stand that will bolt to a 383 - 440 block.

 

[chignikred]

see yur inbox

 

[RAYNAT]

Looking for a 10.5" bellhousing for our test stand that will bolt to a 383 - 440 block.

Hi Richard i also need a flywheel for a 69 383 roadrunner do you know what size it takes or how many teeth? Thanks

 

[Richard Sylstra]

Do you have the casting number from your bellhousing?

 

[POMONAMISSEL]

ive got a 130 tooth flywheel and bell housing for a 66 ply 383 car .

 

[POMONAMISSEL]

but i think your wanting a 143 tooth and bell .

 

[Richard Sylstra]

N

but i think your wanting a 143 tooth and bell .

We use a 130 tooth flywheel to test the B and RB engines, as long as it is 10'5" and will bolt on to a 440 were good!

The bell is only use to test fire the engines and set the timing before going to dyno.

 

[Jeremiah]

Richard, if it is a 130 tooth flywheel/ 10.5" clutch i might have one upstairs.