holley 3116 race hemi/wedge carburetors just rebuilt and tuned on my wedge engine..all gaskets replaced, most non stick. new vacuum secondary diaframs , 2.5 power valves added, 74 jetts front and 79 jet size rears, and QFT metering blocks.orange pump cams also. Both front and rear ifr idle holes (in the blocks and plates) have been reduced from the Stock Holley/chrysler sizes of appx .100 down to .032. Totally cleans up the overly rich idle and now runs and tunes as they should. also exterior secondary idle adjustment screws have been installed so u can tune them without the primarys getting away from the transition slots....all these mods r without ANY mods to the carbs them selves.....ships with the original blocks and plates as well but u wont need them...Nice original plating on the carbs !!
i Guarantee your motor will run Better with these than Any carter,edelbrock, etc oem carbs...these r Designed for that crossram.
dated 404- Manufactured Oct 4th week of 1964.
from holley
for 1964-65 426 Wedge and 1968 Chrysler Hemi engines using the Cross Ram intake manifold.
will fit all max wedge crossrams....
FYI, any 3116 or 4236-35 carbs Will need the Idle restrictor mods to be able to idle Without Flooding, FACT. these r already done, save money right here.
i have 2 sets of these, only need 1.
these carbs will fit the hemi crossrams as well as the max wedges which is what they r Designed for, BOTH Engines as per Holley.
1650.00 Shipped to the lower 48 ONLY.
paypal okay.
i Guarantee your motor will run Better with these than Any carter,edelbrock, etc oem carbs...these r Designed for that crossram.
dated 404- Manufactured Oct 4th week of 1964.
from holley
for 1964-65 426 Wedge and 1968 Chrysler Hemi engines using the Cross Ram intake manifold.
will fit all max wedge crossrams....
FYI, any 3116 or 4236-35 carbs Will need the Idle restrictor mods to be able to idle Without Flooding, FACT. these r already done, save money right here.
i have 2 sets of these, only need 1.
these carbs will fit the hemi crossrams as well as the max wedges which is what they r Designed for, BOTH Engines as per Holley.
1650.00 Shipped to the lower 48 ONLY.
paypal okay.
