Mopar Stage 6 heads.

[SandDiesel]

Help me out. Always parts shopping and I see these once in a while. How are they in comparison to the Eddy's and other aluminum heads? I gather Indy is the best, just curious where these fall performance wise. Any education would be appreciated.

 

[72Satellite440]

good question-Id assume they are better than eddys - judges?

 

[1968_Roadrunner]

Don't know how they compare to the Eddys but my brother runs a set of ported ones on his 500" RB and it runs sweet. Mid 10's in a 67 Charger.

 

[Cranky]

Ran high 9's with a set on a 470 stroker in a 2950 lb Duster...some here may know this car....the heads were ported of course....

 

[Dodge 330]

The general consensus of the guys I know that own them is they're pretty rough out of the box and need a lot of machine work to get right. Once done, though, they're a good head.

 

[1968_Roadrunner]

That's kinda what my bro said too.

 

[SandDiesel]

The set a saw are ported with roller rockers attached but used. Makes me a bit nervous buying used aluminums.

 

[HEMI-ITIS]

http://www.moparmusclemagazine.com/...opp_0405_stage_vi_manifold_casting/index.html


http://www.chapmanracingheads.com/products/prodDetails.asp?pID=42

This is good info right here>>> http://users.erols.com/srweiss/tablehdc.htm#Chrysler_Big_Block

I have assisted a friend of mine to obtain good parts for a blown wedge.A set of MP stage 6 alumininummm heads CNC ported by chapman with T & D rockers and stands will "head up" the build with a MP world block holding down the fort:icon_rambo:

 

[moparmarkk]

thats great info,i have a set and intake,going to get to work,thanks,mark

 

[HEMI-ITIS]

I did some homework on those heads,the unported version sucked and alot of work {$$$$$$} needed to go into these heads to make them a great set of heads.