WTB Need `70 gas tank brackets, the ones that are spot welded to the center support.

[torredcuda]

My center support is missing the gas tank brackets/locators that are supposed to be spot welded on to it, they were cut off by a previous owner. Anyone have an old support that has the brackets on it? I know I can buy a new support but rather not spend $200+ for just the brackets I need. They are the two small ones on the support that are flat except for the bump up /\ . Shipping to 03825

 

[davek]

did you check AMD for the brackets?

 

[davek]

68-70 B-body Gas Tank Strap Support Brackets – The Mopar Shop google is your friend

 

[davek]

fits 68 69 70 Charger Roadrunner GTX Coronet Satellite Gas Tank Strap Bracket | eBay

Find many great new & used options and get the best deals for fits 68 69 70 Charger Roadrunner GTX Coronet Satellite Gas Tank Strap Bracket at the best online prices at eBay! Free shipping for many products!

www.ebay.com

 

[dadsbee]

Not what he's after Dave.. he wants the locators on the cross member.

 

[Dodge33]

Originally on the 70 B-body, they positioned 2 rubber blocks that were held
in place by factory screws, attaching them too the gas tank crossmember.
IMO, there should not be an issue using the 68-69 B-bodies locating tabs,
as long as you make certain you get them in the correct spots, or as close
as possible for good fitment, and to make sure your gas filler is centered.

 

[torredcuda]

Originally on the 70 B-body, they positioned 2 rubber blocks that were held
in place by factory screws, attaching them too the gas tank crossmember.
IMO, there should not be an issue using the 68-69 B-bodies locating tabs,
as long as you make certain you get them in the correct spots, or as close
as possible for good fitment, and to make sure your gas filler is centered.

I removed rubber blocks with screws from the small holes, you are saying those are correct for '70 and there are no locating tabs spot welded on the support?

 

[Dodge33]

I removed rubber blocks with screws from the small holes, you are saying those are correct for '70 and there are no locating tabs spot welded on the support?

View attachment 1390795

Correct. Like I said, in my last post if you want to use the locater
tabs during the 68-9 years, that would work too. It's really up to
you what you want. I can check in our shop, and see if we may
have some good locating tabs.

 

[torredcuda]

I wasn`t sure as I didn`t see any signs of old spot welds being cut, I want it correct as possible so I`ll just use the rubber blocks.