Need help IDing these clips please

[MikeyM]

Hi all,

Our '69 Bee came with a bunch of small parts and some trim that need to be put back on. Can anyone tell me what these various clips are and where they go? I think the ones in the left row are for the headliner metal trim? If so, could someone maybe post a pic of that piece installed along with the chrome trim? I think the chrome trim is missing on mine, as I only have the exterior trim above the doors along the roof line.

Thanks very much,
Mikey

 

[steve340]

The set on the far right clip the two halves of the heater box together.
Not sure on the others.

 

[MikeyM]

Thanks, Steve. My heater box came disassembled so that definitely helps.

 

[eldubb440]

at first glance, the ones on the left might hold the interior trim over the doors........but it's early for me

 

[SgtSuperbird]

If the two large brackets have a hole in them, they are to hold the package tray board in place. On the left, you are correct. (On the right, now I don't know... thought they were for the heater boxes on 70s E-Bodies, but I just checked my reference pictures, and that is not correct). The other clips are for the headliner bows.

 

[R413]

Left clips, they go in the interior metal trim above the side glass to hold it to the roof

Top 2 for package tray, the screw in from the front and the top edge goes over th cardboard.

Middle 4 go in the roof rails and the headliner bows rest in them.

The right clips I don't recognize and a 66-70 heater box doesn't use any clips to hold it together.

 

[MikeyM]

Thanks everyone. Does anyone have a picture of how the metal trim (and chrome trim??) above the side glass are installed? I'm looking in the FSM but it's tough to see.

Thanks,
Mikey