Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Thanks for the measurement!
I have checked my 1970 Satellite trim and have 2 pieces 50 1/2" ( 2 doors ) and 2 pieces 59" ( front fenders ).
The front fender Chrome is tapered down at one end so you can't trim it and use it for the quarter.
SORRY!
When I did some checking on the taper I realized that the side moldings I have are for 1968 and 1969 Satellites. They are not the wider parts with the black section in the middle!
Double sorry!
I am going to clean them up and list them in the for sale section soon!
I made trunk lid trim for my 66 Coronet from 66 Charger fender trim.
The profile is almost the same, and I cut it to length, but left the "top" of the channel long, then trimmed it to match the profile, and bent it over on the ends.
You can't tell unless you get right up on it.
My plan was to flow solder into the small gap but it turned out so good I haven't bothered.
Good question YY, he lives local, maybe we can all meet up and you can look at what he needs, or.. if your in the mood head over to Lakeland Cruizers show at Big Lots on S. Fl ave friday