FOR SALE Parting 1968 coronet two door rusty back nice front

[moparmendy]

you would not happen to have anything that i could patch this spot with, do you?

thanks to force28x who was great to deal with..this part has been cut off the car..still a ton of great sheet metal left..
Please let me know what you need.
Thanks,
gary

 

[moparmendy]

UPDATE ON THE CORONET: roof has been sold...car was cut above the factory welds on the a-pillar...and just below the factory welds on the c-pillar....

the front half of the car is in very very useable and nice shape and includes:
here are the budget prices on this stuff.....

circle track front fenders say 50 a piece (you also get the front splash shields which should/may be nice)
beautiful cowl and firewall 250
inner fenders and core support 250
front frame rails 150
beautiful complete front k frame and front brake set up complete 450
front floor humb area for console....very nice 75.00

this values at about 1275 and I left out the front door hinge areas which are super nice...

you can have the whole front of the car...all I listed above for 850!!!!

OR TELL ME WHAT YOU WANT AND I WILL SEE ABOUT CUTTING IT...

ALSO STILL AVAILABLE..Back package tray...etc...

thanks,
gary

 

[uwss]

shock towers wanted

 

[chazman]

Need front fenders to fit 69 superbee, what are circle track fenders?

 

[Propwash]

Could use the rear drum backing plates, wheel cylinder arms, top anchor plate where top of shoes meet, and parking brake hardware inside the drum. 10" or 11" would work.

 

[kb67mopar]

Any chance you have the door panels and are in good shape?

I tried to PM you but your box is full.

 

[moparmendy]

shock towers...if you just mean a reasonable (say three or four inches) area around shocks...150 shipped


68 rust free left and right fenders 1200...circle track means race car fenders..



all brake hardware requested 125 shipped including backing plates

I am checking on door panels

 

[METAL BEE 68]

How are both bumpers? Price and Shipping to 66018

 

[moparmendy]

I will be checking my 68 bumper stock tomorrow..i should have some that are suitable...back with pricing and condition tomorrow

 

[the_engineers]

I'm looking for a set of rear shock plates. Let me know how much, shipped, to 68516. Thanks!

 

[moparmendy]

I'm looking for a set of rear shock plates. Let me know how much, shipped, to 68516. Thanks!

the only set I have right now is the nicest I have ever had and I need 120 shipped for them. they are incredibly nice

 

[Phils68RR]

Hi, I need a neutral safety sw harness for a automaticThanks Phil

 

[moparedtn]

Do you still have the parking brake assembly and if so, is it any good? Thanks.

 

[YY1]

How much for this, if you didn't sell the driver side section already?

 

[YY1]

Looks like I'm gonna need a few inched farther up the slope towards the front.

Not as far as seat track holes, though.

Still interested.

 

[moparmendy]

Looks like I'm gonna need a few inched farther up the slope towards the front.

Not as far as seat track holes, though.

Still interested.

that section is gone..most of what is left is the cowl, rad support and the rear quarter window inside sheet metal..she been a great donor

 

[YY1]

Shucks.

All of it or just the one rear pan?

 

[WesleyK]

Cross member

What about the torsion bar cross member is it in good shape and available?

 

[flypaper]

i would be interested in the rear filler panel with the upper trunk gutter
if you still have it and if its in good shape..

 

[CRAIGXLH1]

do you have a good antenna