Parting out 62-74

[moparmarks]

I've parted out alot of 62-74 B-bodies over the last decade.
Have K-frames, drive train, suspension, brakes, ect. Lots of the little misc parts.
From Southwestern Desert cars with little or no rust issues.
No 4-spd stuff right now.
Ship worldwide. Also free delivery to several shows across the country.
Here are the cars I have in the yard now.
74 Coronet 400BB
73 Satellite
72 Satellite
72 Charger
66 Coronet 2-dr sedan
66 Coronet 4-dr
Just parted
67 Satellite
73 Charger
74 Charger
62 Belvedere
65 Belvedere
64 Polara
Also have A, E and 61-80 truck parts.

 

[runnin74]

Does the 74 charger have a small block k-frame that is not beat up on the bottom?

I've parted out alot of 62-74 B-bodies over the last decade.
Have K-frames, drive train, suspension, brakes, ect. Lots of the little misc parts.
From Southwestern Desert cars with little or no rust issues.
No 4-spd stuff right now.
Ship worldwide. Also free delivery to several shows across the country.
Here are the cars I have in the yard now.
74 Coronet 400BB
73 Satellite
72 Satellite
72 Charger
66 Coronet 2-dr sedan
66 Coronet 4-dr
Just parted
67 Satellite
73 Charger
74 Charger
62 Belvedere
65 Belvedere
64 Polara
Also have A, E and 61-80 truck parts.

 

[funnycar]

im looking for front bench seat 2 door 1965 belvedere please

 

[rrowdy]

63 Plymouth Fury seat trim

Searching for 63 Plymouth chrome seat trim. This trim goes on the sides of the seat backs and also the hinge covers.

 

[moparmarks]

Does the 74 charger have a small block k-frame that is not beat up on the bottom?

The red 73 Satellite has a sb k-frame. I'll check on its condition.
Thanks

- - - Updated - - -

im looking for front bench seat 2 door 1965 belvedere please

Have a bench from a 64 Polara with the center are rest. Is just the frame and tracks and is not the greatest condition. Car sat for years without a roof and it has some rust issues. Wanted 100.00 for it and can e-mail pics.
Thanks mark

- - - Updated - - -

Searching for 63 Plymouth chrome seat trim. This trim goes on the sides of the seat backs and also the hinge covers.

Sorry I don't have any right now.
Thanks

 

[dellortox4]

Do you have the drivers side quarter glass for 65 satellite / belvedere

 

[moparmarks]

Do you have the drivers side quarter glass for 65 satellite / belvedere

Clear or tinted?

 

[arsinist01]

Got the metal mounts for the k member on the 72 satellite? Looking to replace the rubber bushings on my k member with the metal mounts.

 

[64fairlane]

quarter panels 64 polara

rear quarter panels 64 polara lh and rh,do you have?

 

[moparmarks]

rear quarter panels 64 polara lh and rh,do you have?

Sorry I sold them last summer.
Thanks

- - - Updated - - -

Got the metal mounts for the k member on the 72 satellite? Looking to replace the rubber bushings on my k member with the metal mounts.

72 doesn't have the K-frame insolators. 73-up does.

 

[1967_Joe]

Do you have a dana 60 rear end for a 67 b body?

 

[moparmarks]

Do you have a dana 60 rear end for a 67 b body?

Sorry I don't. Thanks

 

[SaskRunner]

Looking for exhaust manifolds casting # 3751071 and 3751068 got any?

 

[moparmarks]

Looking for exhaust manifolds casting # 3751071 and 3751068 got any?

Have a nice desert 068 manifold. 75.00 plus shipping
Can send pics.

 

[Omni Source]

71-72 a/c

Good Evening Looking for the small stamped bracket that attaches the from the suction end of the A/C evaporator to the firewall. The Evap end has a hex shaped hole, the firewall end looks like a #8 screw hole. Thanks for your time Omni

 

[moparmarks]

Good Evening Looking for the small stamped bracket that attaches the from the suction end of the A/C evaporator to the firewall. The Evap end has a hex shaped hole, the firewall end looks like a #8 screw hole. Thanks for your time Omni

Hi. Yes I have a few of those hose brackets. I'll grab a nice one tomorrow

 

[Max440]

67 satellite

I am looking for the rear window trim, Center console plastic, front left fender, and the rear window channel right lower corner. Any of these parts available? Fender would need to be rust free

 

[moparmarks]

Good Evening Looking for the small stamped bracket that attaches the from the suction end of the A/C evaporator to the firewall. The Evap end has a hex shaped hole, the firewall end looks like a #8 screw hole. Thanks for your time Omni

This one? Have a few. Thanks

- - - Updated - - -

I am looking for the rear window trim, Center console plastic, front left fender, and the rear window channel right lower corner. Any of these parts available? Fender would need to be rust free

Sorry I don't have any of those parts. The 67 Satellite was pretty much a stripped shell when I got it.
Thanks

 

[Omni Source]

Good Evening

Yes, thats it!
How much to ship to 43567-9580?

Thanks for your time

Omni

 

[moparmarks]

Good Evening

Yes, thats it!
How much to ship to 43567-9580?

Thanks for your time

Omni

Hows 10 bucks shipped?