parting out 67coronet 4 door

[65NUTCASE]

Good running low mileage 318 Eddy performer intake and carb. All drum brakes. a/t. Good suspension. in P.A. 16637 everything cheap.. Pat

 

[dave dodge]

What wiper motor is in the car. Also interested in the driver side inspection cover on inner fender w/screws and upper horn.
thanks Dave

 

[mopar joe]

need trunk spare tirewell /wiring harness/underdash wiring

pat joe from jackson nj 08527 want to know if you removed the parts that i was interested in have a good easter mopar joe

 

[four40cuda]

What shape are the grill surrounds in?

 

[moparnutt]

I am looking for a r/h foward brake line. The hard line that goes from the proportioning valve, across the firewall, to the wheel well. It must have an approximately 4 inch rise in it where it crosses over the transmission tunnel area. Then it drops back down again before it drops to the wheel well area. I'd also need a set of 14 inch rear brake backing plates with the emergency brake cables and housings. And a small block engine wiring harness. Any help would be greatly appreciated

 

[krowbar]

Do you have a rear bumper?

 

[MoparBill]

I have a friend that needs both fenders from that car!

 

[69Coronetrt]

I'd be interested in the fender tag, certicard, or broadcast sheets if you find them.

 

[383MovingViolation]

The factory jack and everything that goes with it ???

 

[moparsteve636]

How about the lower left 1/4 from the wheel opening to the bumper?