SOLD Parting out 74 Charger SE

Mopar Parts Cars/Parting out

Thread Status:
Not open for further replies.
  1. nstyle73

    nstyle73 Well-Known Member

    Messages:
    420
    Likes Received:
    120
    Joined:
    Jan 17, 2012
    Location:
    Illinois
    Local Time:
    11:59 PM
    Contact Seller
    74 Charger SE 318/904/8.25 car with bucket/buddy seat interior. The rear bumper, front fenders, are rusty beyond use, unless you need a patch panel, which I could cut out if that part is nice. Fenders are good in the dogleg area. Frame, floors, firewall etc are all very nice. 74 only trunk pan is Excellent. Most trim is very nice. I bought the car for the sunroof parts and wiring harnesses as well as the trunk and hood, so those are spoken for. Anything else you need I can get pics, post a description and make me an offer. Not looking to get rich, as I got what I needed and am planning on scrapping the car when done as it doesn't have a title.
     
  2. 72Fourspeed

    72Fourspeed Well-Known Member

    Messages:
    1,617
    Likes Received:
    783
    Joined:
    Dec 9, 2009
    Location:
    Idaho
    Local Time:
    10:59 PM
    Dash pad ?
     
  3. nstyle73

    nstyle73 Well-Known Member

    Messages:
    420
    Likes Received:
    120
    Joined:
    Jan 17, 2012
    Location:
    Illinois
    Local Time:
    11:59 PM
    Dash pad is shot, door panels are pretty good, has tuff wheel, but foam is dried, other parts are good. Rally gauge cluster. Pictures coming tomorrow.
     
  4. 69Coronetrt

    69Coronetrt Well-Known Member

    Messages:
    3,073
    Likes Received:
    1994
    Joined:
    Jul 17, 2008
    Location:
    Harlan, IA
    Local Time:
    11:59 PM
    I'd be interested in the fender tag, broadcast sheet or any other dealer or factory documents you come across. :)
     
  5. nstyle73

    nstyle73 Well-Known Member

    Messages:
    420
    Likes Received:
    120
    Joined:
    Jan 17, 2012
    Location:
    Illinois
    Local Time:
    11:59 PM
    I have the owner's manual and fender tag. The broadcast sheet that I found under the front seats was unsalvageable and probably wasn't from this car, but I'll see if one is tucked somewhere else.
     
  6. Chargerjase

    Chargerjase FBBO Gold Member FBBO Gold Member

    Messages:
    1,068
    Likes Received:
    1286
    Joined:
    Oct 16, 2013
    Location:
    New Zealand
    Local Time:
    4:59 PM
    Do you have the door pull hardware? Are the chrome and wood grain parts that cover the mounting screws for the door pulls in good shape? I would be interested in all of the clips, screws and fixings for those on both doors if possible. I also need the door bolts that attach the power window motors and some of the bolts that hold the window tracks in place.

    Do you have the high beam plug that is not melted? As you can see, mine is toast. I don't mind if you cut the wires as I only need the plastic piece.

    Dip Plug.jpg Slide1.jpg Clip.jpg
     
  7. 72 BLUE 400

    72 BLUE 400 Well-Known Member

    Messages:
    790
    Likes Received:
    119
    Joined:
    Dec 25, 2009
    Location:
    michigan
    Local Time:
    12:59 AM
    your pm box is full,i just need the wiper knob itself.
     
  8. 69Coronetrt

    69Coronetrt Well-Known Member

    Messages:
    3,073
    Likes Received:
    1994
    Joined:
    Jul 17, 2008
    Location:
    Harlan, IA
    Local Time:
    11:59 PM
    Thank you. Anything you will part with is appreciated.
     
  9. nstyle73

    nstyle73 Well-Known Member

    Messages:
    420
    Likes Received:
    120
    Joined:
    Jan 17, 2012
    Location:
    Illinois
    Local Time:
    11:59 PM
    Sorry, no power windows on this guy. PM box cleaned out.
     
  10. nstyle73

    nstyle73 Well-Known Member

    Messages:
    420
    Likes Received:
    120
    Joined:
    Jan 17, 2012
    Location:
    Illinois
    Local Time:
    11:59 PM
    Not pretty, and don't ask me what they did to the left fender and door, but the door is pretty solid despite the hideousness. Front bumper is straight and solid, might even be good enough for a driver with some polishing. Floor pans are solid except the driver's front.
     

    Attached Files:

  11. Timberice

    Timberice Active Member

    Messages:
    28
    Likes Received:
    4
    Joined:
    Mar 5, 2015
    Location:
    Chicago,IL
    Local Time:
    11:59 PM
    PM sent
     
  12. 74charger07ram

    74charger07ram Well-Known Member

    Messages:
    405
    Likes Received:
    99
    Joined:
    Aug 14, 2013
    Location:
    Weatherford Texas
    Local Time:
    11:59 PM
    PM sent
     
  13. nstyle73

    nstyle73 Well-Known Member

    Messages:
    420
    Likes Received:
    120
    Joined:
    Jan 17, 2012
    Location:
    Illinois
    Local Time:
    11:59 PM
    Lots of interest, just to make things a little easier, all of the parts I have for the car are on the car. So if an area is pictured and the part you need is missing, I probably can't help. If the part you need is in an area that isn't pictured, let me know and I will check to see and/or get a picture of the item or area.

    Parts Gone/Pending:
    Loaded K-Frame
    Cruise Control Parts
    Door Pull Hardware
    Brake Booster and MC
     
  14. Cranky

    Cranky Banned Staff Member FBBO Gold Member

    Messages:
    23,601
    Likes Received:
    22071
    Joined:
    Dec 4, 2009
    Location:
    Pasa-getdown-dena Texas
    Local Time:
    11:59 PM
    No prices for anything?? Are we supposed to guess? Please read the rules for placing ads, thanks.
     
  15. nstyle73

    nstyle73 Well-Known Member

    Messages:
    420
    Likes Received:
    120
    Joined:
    Jan 17, 2012
    Location:
    Illinois
    Local Time:
    11:59 PM
    I have read the posting rules and as I didn't specifically advertise each part, and basically I have been accepting offers on most parts that have been requested as a lot of the things have been small stuff no one ever advertises. The rules state that for parts or car sellers a price must be posted. As I did not specifically advertise any one part, I did not post a price. I did forget to include that shipping will be from Martinsville, IL, zip 62442. The parts I had a definitive asking price for have been listed separately in the appropriate sections of the classifieds with asking prices. I have not posted email addresses, phone numbers or commentary. BUT , I appreciate the ad space, so perhaps this will help:

    (Prices do not include shipping)

    Doors $150 obo each
    Front Bumper $75 obo
    Rear exterior window louvers $35
    Trunk Pan $175 obo
    Windshield Trim $50
    Rear Window Trim $50
     

    Attached Files:

    Last edited: Dec 1, 2015
  16. Bb70charger500

    Bb70charger500 FBBO Gold Member FBBO Gold Member

    Messages:
    9,563
    Likes Received:
    9604
    Joined:
    May 2, 2014
    Location:
    fl.
    Local Time:
    12:59 AM
    How much is the gauge setup ?
     
  17. plymouthman

    plymouthman Well-Known Member

    Messages:
    136
    Likes Received:
    8
    Joined:
    Oct 5, 2014
    Location:
    Hagerstown md
    Local Time:
    11:59 PM
    Interested in both inner wheel tubs { l & R } cut at the inner outer seam and at the frame rails .
    How much shipped to hagerstown MD. 21740
     
  18. ODZKing

    ODZKing Well-Known Member

    Messages:
    1,752
    Likes Received:
    616
    Joined:
    Sep 2, 2013
    Location:
    Liverpool, NY
    Local Time:
    12:59 AM
    PM sent
     
  19. nstyle73

    nstyle73 Well-Known Member

    Messages:
    420
    Likes Received:
    120
    Joined:
    Jan 17, 2012
    Location:
    Illinois
    Local Time:
    11:59 PM
    Gauges look good, clock is labeled "Good" on the backside, but I don't know when that was written. 150mph Speedo. Asking $175 +shipping obo

    DSCN8150.jpg DSCN8151.jpg DSCN8152.jpg
     
    • Like Like x 1
    Thread Status:
    Not open for further replies.
    1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
      By continuing to use this site, you are consenting to our use of cookies.