poly head 318 four barrel intake

[brandon64]

I'm looking for a 4 barrel intake for a poly head 318, in usable condition. PM me with what you got, and a price plus shipping to 37138. thanks

 

[bluefury]

318 4 bbl

I'm looking for a 4 barrel intake for a poly head 318, in usable condition. PM me with what you got, and a price plus shipping to 37138. thanks.​

A 4bbl intake for a poly is one of the toughest Mopar engine parts to locate. Early ones, (56-58), used a small base Carter WCFM carb. 59-62, (last year for a poly 4bbl) used a AFB. There were a couple of different aluminum aftermarket 4bbl manifolds but they were discontinued. Any of the above are very rare and if located expect to pay $400.00 plus. Less then that is a bargain. The dual quad manifolds are not as hard to locate and there are even a few aftermarket 3-2bbl manifolds out there.

Good luck with your search.

JUST MISSED THIS ONE.....

http://cgi.ebay.com/ebaymotors/318-...dZp5197Q2em7QQitemZ320707052117#ht_500wt_1182

 

[brandon64]

That is a little out of my price range. I would consider 3 deuce, or 2 fours. I just need something better than a two barrel. I've been watching ebay for one to come around. thanks

 

[wedgie]

They are around. Just need to keep your eyes open. I think Music City Mopars is having their swap meet soon. In the meantime, what about a 2bbl to 4bbl adapter? My Coronet had one with a 500cfm Edelbrock carb when I purchased the car a few years ago. The 273 actually ran pretty well with it. A lot better than with a stromberg 2bbl. Just voicing another option until you find exactly what you are looking for.

 

[brandon64]

after much searching I found a whole engine with 4 barrel intake in PA for 2 hundred. asked if he would sell just the intake and how much. found a 6 pack intake for 150, and found a set of carbs for it for another 150. and found a dual 4 for 125, and I already have two 650 holleys that will bolt on but I think two fours will be way too much carb for a stock poly 318. what do you guys think?

 

[bluefury]

Go for it....!!!

after much searching I found a whole engine with 4 barrel intake in PA for 2 hundred. asked if he would sell just the intake and how much. found a 6 pack intake for 150, and found a set of carbs for it for another 150. and found a dual 4 for 125, and I already have two 650 holleys that will bolt on but I think two fours will be way too much carb for a stock poly 318.​

All sound like a good bargain.... Buy all of them.... but the best one for your application will be the 4 bbl​

 

[drive48]

afb 4bbl

I'm looking for a 4 barrel intake for a poly head 318, in usable condition. PM me with what you got, and a price plus shipping to 37138. thanks

have 1 left from 2 i bought at carlisle last fall 1 is now on my 66 coronet

paid 380.00 each

if you need one ill sell to ya delivered for that. if not no problem it can sit on my shelf for the next build....

casting # 2206384 afb 4bbl.... with 3 aluminum carb adapters if needed.

 

[brandon64]

have 1 left from 2 i bought at carlisle last fall 1 is now on my 66 coronet

paid 380.00 each

if you need one ill sell to ya delivered for that. if not no problem it can sit on my shelf for the next build....

casting # 2206384 afb 4bbl.... with 3 aluminum carb adapters if needed.

no offence at all, but set it on your shelf. I did not know how rare these were when I posted the thread. No 4 barrel intake is worth that much, TO ME. I'm just running this engine in my 64 until I can afford to build another big block. I'm building a big block right now for my 68 dart, and I've been collecting parts for 5 years. 400 bucks can buy a lot of big block parts, I'll deal with the two barrel for now I guess, unless I get a great deal on an intake. I'm willing to pay like 200 max for a four or I'll just run the two. Thanks

 

[70redbee]

Why not buy the complete engine for 200? Keep the intake and sell the rest.