• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE Race car project

Status
Not open for further replies.

Moparmatt72

Well-Known Member
Local time
5:56 PM
Joined
Dec 1, 2011
Messages
1,023
Reaction score
195
Location
Nampa, Idaho
Feedback: 1 / 0 / 0
Contact seller
Location Riverside, Ca

I have my 72 satellite that I won't be able to get to since taking on a 67 dart. It has a 440 bored .060 with good meat left on the cylinders, head and mains studded, 11.5:1 ratio hyper pistons, CAT h beam rods, factory steel crank all balanced, Isky 292 cam, dual roller timing chain,440source stealth heads with CAT 1.7 rockers, home gaskets matched, M1 intake with a 1050 Dom. Hooker supercomp headers, flanges removed and install v band, have the other side and clamp. 440 source oil pan and water pump, housing is aftermarket aluminum, Griffin dual pass rad. Only have one 12" fan was going to install another, b&m oil cooler and trans cooler. Dual Oil filter relocation kit. Trans is a 727 warmed up can't remember what's all in it but had the red bands, J&W reverse Manuel VB, Hughes 3500 stall, no drive shaft, Dana rear end taken out of a truck, new end tubes, 4:56:1 gears and a locker, strange drag rear disc(not plumbed). Have fiberglass door for it from US body, no front fenders,hood or deck lid, have satillite grill insert, decent shape, rear tail light lens okay condition, has painless wiring 8 switch panel just holding on to the windshield trim till I was going to have a cage put it. Summit poly seats with covers, S&W aluminum dash, all gauges are new except the tach, MSD 7al box, HVAC coil, and Mopar race wires. Aeromotive A2000 fuel pump and reg. , 20 gal fuel cell hasnt been mounted, is a square cut in the floor from the previous plastic cell that was in there.Haven't ran the engine in a long time. Summit brand wheel, have 15x4 front and 15x10 rears, will bring down the fronts when i come back to cali, moved to Idaho. Hoping to get $3000. Have stock header panel and front valance, new carpet kit and I believe a new seal kit for the car, will have to double check that. Car is at my brothers house but now he's moving to Utah for a job, will be down July 24 evening but all day the 25. If interested let me know. Have had this car since I was 16 my first Mopar :(
Can email a video of the first time we started it, can't seem to be able to upload, pm for video
20200607_105342.jpg 20200607_105443.jpg 20200607_105447.jpg 20200607_105600.jpg my engine-2.jpg 20140510_171716.jpg 20140510_171807.jpg
 
Last edited:
Found pics of the rear diff, when I was building the engine, has cometic head gaskets. And forgot has SS springs.

20130309_163339.jpg 50561-6f1469de2b7164ef6680965a4064227f.jpg
 
Status
Not open for further replies.
Auto Transport Service
Back
Top