WTB Rare 71;

[Rare 71']

Looking for or WTB
Searching for some finish trim mouldings for b-body 71'-72' vinyl top. Needing the
two short end pieces that finish the wrap around rear quarter panels and meet the
rear window moulding. These have a pretty sharp bend and the end. They have one
post that goes in through the quarter panel and gets a speed nut and the front end tucks
under the other longer moulding that runs forward to and meets the quarter window trim.
This other end of the short trim moulding has a hole that takes a clip or screw. Not exactly
sure which one. Hopefully someone has some insight on these pieces. Thanks for reading.

Tank

 

[Bee1971]

Don’t know the quality


https://www.classicindustries.com/product/MB281037.html

 

[QuickBpBp]

Looking for or WTB
Searching for some finish trim mouldings for b-body 71'-72' vinyl top. Needing the
two short end pieces that finish the wrap around rear quarter panels and meet the
rear window moulding. These have a pretty sharp bend and the end. They have one
post that goes in through the quarter panel and gets a speed nut and the front end tucks
under the other longer moulding that runs forward to and meets the quarter window trim.
This other end of the short trim moulding has a hole that takes a clip or screw. Not exactly
sure which one. Hopefully someone has some insight on these pieces. Thanks for reading.

Tank

You will need to specify Plymouth or Dodge. I am thinking Plymouth because Charger reproductions have been around for a long time and fit 71-74 Chargers. The ones for a Plymouth are only 71-72. I have a nice driver quality set BUT the little tab that goes under the trim is missing. You can not see this when installed as the trim is over it. PM any interest and I can post pictures.