Sheet Metal Panels

[musclecar61]

Can anyone tell me where I can purchase repair panels for a 1973 Plymouth Satellite? I have a very nice 73 with very little rust on the body but like most MOPAR's there is rust. I have rust in front of the lower left rear fender in front of wheel well and the same for the right side. The car came with a 400 big block but I have a 440 I want to drop in after I rebuild it. I want the sheetmetal repaired ASAP. My goal is to clone it into a Road Runner, it has a 727 tranny but I would like to make it a 4 speed car if possible. Thanks for any help. Please bare with me as I am new to forums and don't know the ropes yet.


Russ

 

[oxytousc]

Can anyone tell me where I can purchase repair panels for a 1973 Plymouth Satellite? I have a very nice 73 with very little rust on the body but like most MOPAR's there is rust. I have rust in front of the lower left rear fender in front of wheel well and the same for the right side. The car came with a 400 big block but I have a 440 I want to drop in after I rebuild it. I want the sheetmetal repaired ASAP. My goal is to clone it into a Road Runner, it has a 727 tranny but I would like to make it a 4 speed car if possible. Thanks for any help. Please bare with me as I am new to forums and don't know the ropes yet.


Russ

You're going to have to source them from a yard or from another member on here. There isn't any aftermarket sheetmetal support for the 73-74. I know a few guys in CA with some panels, if you can't find anything else.

 

[Randy73]

What sheet metal do you need?

All floor pans, qtr panels are all being made, along with door skins.

 

[greenmonsta79]

I last heard AMD had the tooling and was ready to start making the 73-74 quarters, Seems as if they are always coming out with new panels for different models.

 

[RTSrunner]

We need '73 and '74 Charger fenders and quarters too!May as well add doors while we're at it!
RT

 

[greenmonsta79]

look a couple threads down NOS 73-74 Charger fenders and quarters! might want to go look at it! for the money on original Mopar panels your never gonna find em' again!

 

[oxytousc]

What sheet metal do you need?

All floor pans, qtr panels are all being made, along with door skins.

Randy...you gotta link to someone that has new 73-74 Roadrunner door skins? I'd be interested.