I got a full set of painted racing mirrors from Carlisle. I separated the pedestal & housing and removed the mirror mechanism. Of course someone had tried and failed this at some point and I ended up drilling out one screw inside the housing for the mirror and one screw for the pedestal-to- housing. The screws for the pedestals look like standard screws, no problem for me to get. The inside screws, however, I'm at a loss as to where to get them. I was hoping someone here had some insight on this for me. Thanks!
Side view mirror hardware
- Thread starter 2012ChargerBlacktop
- Start date
Moparparts
Well-Known Member
I have the original base to door mounting screws and may have the base to head mounting screws but would need a size on that one. Message me if you still need these
These are screws I am talking about.
Similar threads
