WTB Small block transmission lever / bell crank
- Thread starter ir3333
- Start date
- Status
- Local time
- 9:11 AM
- Joined
- Sep 4, 2011
- Messages
- 2,837
- Reaction score
- 172
- Location
- Mishawaka, Indiana 46544
I have one if still needed. PM me if interested.
Sparky Anderson
Well-Known Member
Not sure what part of Canada, but if in Ontario, you missed the boat ride at Mopar fest in August between Kitchener and Strafford, the parts vendors had everything u need at a reasonable cost. Plus there was around 2200 Mopar's in the car show, biggest Mopar car show in Canadian waters.
ir3333
Well-Known Member
Tx Sparky...most of my buddies go for the whole weekend but oddly enough even though i used to go to Carlisle every year i have never been to Moparfest....guess i should go one of the years.
As for the kickdown bell crank i had some 1 1/2" 10 gauge square tubing kicking around so i just made one!
It was easier to copy and build the e body 340 piece, but i could still change it.
As for the kickdown bell crank i had some 1 1/2" 10 gauge square tubing kicking around so i just made one!
It was easier to copy and build the e body 340 piece, but i could still change it.
- Status
Similar threads
- Locked
- Locked
