SOLD Small water pump pulley from a big block Mopar

[68HemiRR]

This is a small water pump pulley from a big block Mopar.
It is in good condition. Just needs a cleanup. The
dimensions are in the photos. $25.00. Local pickup,
or buyer pays shipping.

 

[RJRENTON]

This is a small water pump pulley from a big block Mopar.
It is in good condition. Just needs a cleanup. The
dimensions are in the photos. $25.00. Local pickup,
or buyer pays shipping.

View attachment 1325689

View attachment 1325690

View attachment 1325691

View attachment 1325692

Possible to get the Mopar part number? Should be somewhere on a front or back side flat surface. Thanx...PM or just add to the listing.....
BOB RENTON

 

[68HemiRR]

Possible to get the Mopar part number? Should be somewhere on a front or back side flat surface. Thanx...PM or just add to the listing.....
BOB RENTON

Hi Bob, I've never seen a part number on a water pump pulley, but I checked it anyway, and didn't find one. If it helps, this pulley came off of a 1968 440 with A/C

Grant

 

[RJRENTON]

Hi Bob, I've never seen a part number on a water pump pulley, but I checked it anyway, and didn't find one. If it helps, this pulley came off of a 1968 440 with A/C

Grant

Thanks for the reply.....both B & RB engines, when equipped with A/C, used an underdrive water pump /thermal drive assembly (turning faster than the crankshaft sheave) to promote higher velocity (faster) coolant circulation and better heat transfer between block/heads and the radiator, to prevent an overheating condition. I was searching for a part # 2946716 sheave. It has a slightly different offset (back side face to drive center line)for the drive belt (longer) and a slightly bigger pitch diameter. Its for s Hemi installation w/w-o PS. I appreciate your help and understanding......
BOB RENTON

 

[HemiLane]

This is a small water pump pulley from a big block Mopar.
It is in good condition. Just needs a cleanup. The
dimensions are in the photos. $25.00. Local pickup,
or buyer pays shipping.

View attachment 1325689

View attachment 1325690

View attachment 1325691

View attachment 1325692

Hi, would like to get this pulley from you, PM me if it is still available
Thanks,
Lane

 

[68HemiRR]

Hi, would like to get this pulley from you, PM me if it is still available
Thanks,
Lane

PM sent