Starting on the Janak Headlight assembies

hemi446

Well-Known Member
Local time
1:58 AM
Joined
Mar 14, 2014
Messages
91
Reaction score
72
Location
Ellicott City Md
So I'm starting on my Superbird Clone using Janak parts. What I really need some help with is on the back of the headlight pivot bracket is a metal strip that the screws for the headlight adjuster springs thread into and the bracket that is on the back for the vacuum pod rod to attach to. If anyone has one I can use to make some templates from or if you have an old rusted one I could borrow for a little while. I promise to return it in the same condition I got it in. But since I have never seen one in person I have no idea what I need to make to make my headlights work like the originals. Even some really nice pictures may work I don't know. Thanks very much for any help I can get. This is going to be a long term project but if I can get the front end put together that seem to be the hardest part of these conversions. And I'm sure I will need lots more help before it's over and maybe I can help someone else down the road. Thanks Again Bobby
 
Last edited:

Top