TCI Reverse Manual Valve Body

[Andyw]

I realy hate to do this, this thing shifts firm and solid I love that part of it. Unfortunatly I hate the reverse pattern, it completley defeats the purpase of the slapstick in my 72 Roadruner.

I would trade straight up for a TCI forward shift manual VB or sell outright for $140 shipped.

I just noticed how blurry the pic is, I'll retake it tonight lol

 

[johns]

Hey Andy,

Does it have the low band apply to 1st? I assume its for a BB 727

 

[Andyw]

Hey Andy,

Does it have the low band apply to 1st? I assume its for a BB 727

I'm sorry I dont know what this is "Does it have the low band apply to 1st"

It came in my Roadrunner when I bought it. Yes its for a 727. Like I said it shifts outstanding, just dont like the feeling of the reverse pattern.

I'm sorry I havnt got a new pic up, been having water problems at home that has me preoccupied

 

[johns]

I'm sorry I dont know what this is "Does it have the low band apply to 1st"

It came in my Roadrunner when I bought it. Yes its for a 727. Like I said it shifts outstanding, just dont like the feeling of the reverse pattern.

I'm sorry I havnt got a new pic up, been having water problems at home that has me preoccupied

Does it slow down on the gears when in 1st amd you take your foot off the gas as a manual car would or does it free wheel with your foot off the gas as if it were in nuetral?

Cheers

John

 

[Andyw]

It slowed down in the gears when I would lift. No free wheeling.

 

[1968_charger]

Ill trade for a forward shift cheetah full manual valvebody
With low band apply if yours has it.

** after I left the message I looked up your valve body. It says that it does not have the first gear braking so ill have to retract my offer.

 

[Andyw]

Ill trade for a forward shift cheetah full manual valvebody
With low band apply if yours has it.

** after I left the message I looked up your valve body. It says that it does not have the first gear braking so ill have to retract my offer.

No problem, thanks for the information at least.

 

[Garys1969RR]

I may be interested in this valve body for my 69 RR. It has column shift, and that reverse shift pattern would work well in my car. Any parts you need? Maybe a trade? I have 2 alum low deck intakes, 440 dual point dist, 516 closed chamber heads, 452 heads, 11 " street hemi torque converter, many other parts. Let me know, thanks. Gary

 

[Andyw]

I may be interested in this valve body for my 69 RR. It has column shift, and that reverse shift pattern would work well in my car. Any parts you need? Maybe a trade? I have 2 alum low deck intakes, 440 dual point dist, 516 closed chamber heads, 452 heads, 11 " street hemi torque converter, many other parts. Let me know, thanks. Gary

Not realy, I just got back from The Mopar Nationals in Columbus this past weekend and filled my shopping cart. This will actualy fund having my rear end setup, housing was cracked in the suregrip. Previous owner put the axles in backwards... yes backwards. Pulled the drums off and the axle adjuster was on the drivers side, had a sinking feeling so I had the rear end checked out. So Detriot locker here we come.