Tie Rod and Idler Arm Hit Torsion Bar

[Rey Tobias]

Hi all. After replacing tie rods, pitman arm and idler arm the torsion bar rubs against the tie rod and idler arm on passenger side. I had to remove the grease fitting from inner tie rod on passenger side in order to be able to turn left otherwise it would have busted off. Any ideas on what to check or adjust? Thanks.
rey

 

[ckessel]

Maybe the center link is flipped around if you removed it to do the arms? Otherwise I would say that the two arms have the wrong contour on them and you need to get different ones. What brand are they?