WTB Trim 1963 Plymouth

[Mason66]

Here are 2 pictures of my 1963 Savoy 4 door sedan to show which trim parts I am missing.

If you have any of these I would appreciate a message being shot my way.

The parts don't have to be perfect as this is nowhere near a show car.

Thanks

 

[FU64RY]

Savoys do not have side trim......must be a belvedere or fury

 

[Mason66]

Savoys do not have side trim......must be a belvedere or fury

In this case this is a Mexican spec car and the car is a Savoy VIN 213 and it did have this trim from the factory.

Here in Mexico they used a piece of this and a piece of that to make the cars.

 

[Mason66]

Here are some pictures of another Savoy I am going to buy shortly. You can see the weird bumper gaurds and all of the factory trim they used here in Mexico. It really is a nice car and by USA standards dirt cheap.

 

[FU64RY]

I stand corrected.................I only know us cars.
That red car looks pretty nice.
Get me some sizes and dimensions for what you need and I'll look in my trim supply. An end profile is a must also.
Steve

 

[Mason66]

I stand corrected.................I only know us cars.
That red car looks pretty nice.
Get me some sizes and dimensions for what you need and I'll look in my trim supply. An end profile is a must also.
Steve

Thank you FU64RY

The door piece is the upper, which is the thinner of the 2. It measures 40.25" or 102CM

The fender trim is 4 pieces which are upper 53" long and lower 43.5" long. I will also need the 2 pieces in the following pictures.



- - - Updated - - -

I stand corrected.................I only know us cars.
That red car looks pretty nice.
Get me some sizes and dimensions for what you need and I'll look in my trim supply. An end profile is a must also.
Steve

You would be shocked at what he wants for it. He is asking $59,700 pesos and I am sure it will come down from there. With the exchange rate that comes to about $3600.00 dollars and he says the car is ready to do a cross country trip. Needs nothing.