expresso
New Member
I am having trouble plugging a new under dash wiring harness to the instrument cluster in a 68 GTX. I’ve heard that the pins break off fairly easily so I don’t want to push too hard. Is there a trick to plugging it?
Thanks for the replies. Even with the grease I was not able to work it on. I removed the circuit board from the gauge cluster and backed it up with a block and then tapped the connector on. I’m pretty sure I did not damage any pins or the board. It was just a bit more work. I have the dash out of the car. It would have been very difficult to do if it was in the carLook real close at the pins and make sure you do not have one already slightly bent. Then as said above a little lube help.