U-Joint size
- Thread starter Randy73
- Start date
- Local time
- 9:37 PM
- Joined
- Dec 4, 2009
- Messages
- 38,776
- Reaction score
- 54,614
- Location
- Pasadena, Texas
Had a 340 Challenger with a small one in the front and a large in the rear and it came that way from the factory!
SUPERSTOCKRACER
Well-Known Member
i think that they are 7290
Meep-Meep
дворянин
I wouldn't be surprised if you have the small 7260 size on your car. My 66 Belvedere has the small yokes and it's a 361 car. Here's a comparison of the 7260 and 7290 yokes http://img174.imageshack.us/img174/6995/0001209kf1.jpg
- Local time
- 9:37 PM
- Joined
- Dec 4, 2009
- Messages
- 38,776
- Reaction score
- 54,614
- Location
- Pasadena, Texas
I think the best thing to do is measure what you have....
Supershafts
Well-Known Member
Yeah measure them and see.... over 3.5" wide 7290, not that wide, 7260...
If something has been upgraded, then it can change things
If something has been upgraded, then it can change things
- Local time
- 9:37 PM
- Joined
- Dec 4, 2009
- Messages
- 38,776
- Reaction score
- 54,614
- Location
- Pasadena, Texas
If you are measuring across the caps, you have the small joints and normally, the retaining clips are on the inside of the shaft so it's common for the joint caps to look like they are sticking out...
Supershafts
Well-Known Member
Looks like 7260
Randy73
Well-Known Member
Wow, retaining clips on the inside, learn something new everyday.
Supershafts
Well-Known Member
All of the detroit driveline years in mopars are inside clips.
Mopar was inside clip detroit series till detroit went under in the early 90's, then went to spicer and then aam as it is now, for the trucks anyway the cars are neither
Mopar was inside clip detroit series till detroit went under in the early 90's, then went to spicer and then aam as it is now, for the trucks anyway the cars are neither
scotts74birds
Well-Known Member
Just did the U-joints on my 4x4 Ram.......Lots of them! Went through Dennydriveshafts.com They even sent an e-mail saying "Hey.....if you are doing a Ram, some of these wont fit!" They caught a mistake I made while ordering. Kudos to them. They also have a great reference section. They give all dimensions and cover combination U-joints. They carry Spicer joints, which you want, but are hard to find locally. Good folks to deal with.
Similar threads
