• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD Upper Control Arm Mounting Bolts & Washers. A, B, E, Body Cars.

Status
Not open for further replies.

hemi71x

FBBO Gold Member
FBBO Gold Member
Local time
6:39 AM
Joined
Dec 23, 2009
Messages
2,900
Reaction score
3,599
Location
Rancho Cordova, CA
Feedback: 29 / 0 / 0
Contact seller
These are a set of four, upper control arm adjuster mounting bolts and washers, that are used on the following Mopar automobiles.

I've had a box full of these things, from my rebuilding days of Mopar suspension, and brake parts.
Now these are the very last ones that i have for sale.
This set is incomplete, as i don't have two of the "washers" that belong on the threaded end of the stud.

These would be good for someone that has the two washers, if you had to cut your old bolts out of the car, if you live in the rust bucket states, here in the USA, and you saved your old washers.


1970 - 1974 Barracuda & Challenger, E Body cars.

1962 - 1972 Charger, Super Bee, Roadrunner, GTX, Satellite, Belvedere, Coronet, all the B body line of cars.

1962- 1976 Duster, Dart, Demon, Valiant, Scamp, Swinger, all the A Body line of cars.

Excellent factory parts for all you guys living in the rust bucket states, when your replacing the bushings in your upper control arms.
All cleaned up on the wire wheel brush, ready for installation.

Lower price at $35.00 for the four of them, + $10.50 for the mailman, in a small USPS flat rate box. (In the USA).

Payment, i accept Pay Pal.

Send me a pm, and i can then send you my payment e mail address.
Thank's a lot.

UCA Bolts - Washers Incomplete 001 (Small).JPG


UCA Bolts - Washers Incomplete 004 (Small).JPG


UCA Bolts - Washers Incomplete 003 (Small).JPG
 
Status
Not open for further replies.
Auto Transport Service
Back
Top