wanted info.on whereto find 66-70 floor shift linkage and parts

[chargehard]

wanted info.on whereto find 66-70 floor shift linkage and parts

 

[Propwash]

Well, If you're referring to factory floor shift parts, the linkage directly off the shifter and the shifter rod support bracket are repopped and easily availible. The linkage/hardware forward of that is the tough stuff to find. Found what I needed off of a member here and ebay. Talk with FBBO member Moparparts. He is a great guy to deal with and has quite an impressive amount of parts on hand. Below are a couple of the pieces of the puzzle for you....Just keep in mind the NOS stuff usually fits better and is typically better quality though. Good luck!


http://www.megapartsusa.com/proddetail.asp?prod=171-CP131-SL

http://www.megapartsusa.com/proddetail.asp?prod=101-CP60401

 

[Gpuller]

I have some out of a '66 Charger, what are you looking for?

 

[Moparparts]

Those remake console linkage parts are not correct the way they list them for all those years of B-Bodies. 66 and 70 do not use the same vertical torque shaft and upper linkage rod as a 67-69 B-Body does and the 70 B-Body uses a different upper shaft bracket then a 66-69 B-Body does. The shafts, brackets and rods are also different for some of the years for B-Bodies as compared to the A & C-Bodies. What year do you need?

 

[chargehard]

Those remake console linkage parts are not correct the way they list them for all those years of B-Bodies. 66 and 70 do not use the same vertical torque shaft and upper linkage rod as a 67-69 B-Body does and the 70 B-Body uses a different upper shaft bracket then a 66-69 B-Body does. The shafts, brackets and rods are also different for some of the years for B-Bodies as compared to the A & C-Bodies. What year do you need?

havent bought it yet nobody knows either a 66 or67,it has a backup light switch.