Hossbee
Well-Known Member
- Local time
- 12:28 AM
- Joined
- Mar 10, 2011
- Messages
- 2,109
- Reaction score
- 4,711
- Location
- Harrisville, MS
Wanted pushrods
- Thread starter Hossbee
- Start date
- Status
- Local time
- 12:28 AM
- Joined
- Dec 4, 2009
- Messages
- 37,540
- Reaction score
- 51,401
- Location
- Pasadena, Texas
Are you measuring from the tip of the ball to the top of the cup?
Hossbee
Well-Known Member
- Local time
- 12:28 AM
- Joined
- Mar 10, 2011
- Messages
- 2,109
- Reaction score
- 4,711
- Location
- Harrisville, MS
I'm using roller rockers on my 400 with hydraulic cam. I looked at Isky website an looks like for my engine I would need a 8.578 cup/ball. That is what the stock pushrods roughly measured.
- Local time
- 12:28 AM
- Joined
- Dec 4, 2009
- Messages
- 37,540
- Reaction score
- 51,401
- Location
- Pasadena, Texas
The 1633's? I have a set of those and that's what they measure and I guess that's how they measure them....
Hossbee
Well-Known Member
- Local time
- 12:28 AM
- Joined
- Mar 10, 2011
- Messages
- 2,109
- Reaction score
- 4,711
- Location
- Harrisville, MS
Yes the part number is 1633-A. How much were you looking to get for them?
- Local time
- 12:28 AM
- Joined
- Dec 4, 2009
- Messages
- 37,540
- Reaction score
- 51,401
- Location
- Pasadena, Texas
They are new.....never been installed. 110 shipping included.
Hossbee
Well-Known Member
- Local time
- 12:28 AM
- Joined
- Mar 10, 2011
- Messages
- 2,109
- Reaction score
- 4,711
- Location
- Harrisville, MS
I have someone else suppose to get with me. I will let you know. I appreciate your help.
- Status
Similar threads
