Wheel Wednesday

[Charles Cook]

 

[chargervert]

I have the same Dynacorn wheels. There is no chamfer on the lug holes. Make sure the knurls of the wheel studs do not sit proud of the axle flange. Mine did and I had to relieve the back of the wheel.

Thanks for letting me know,I will check and modify as needed.

 

[Cheapsunglasses]

8 pm on Wednesday night and no one posted on Wheel Wednesday? Well here at do nothing garage, contrary to belief, I try to accomplish one car related thing per day. So today I modified stock Magnum 500 center caps to fit on my Dynacorn 15 inch Magnum wheels. It was easy enough to do. I just ground off about a quarter inch of the 5 spoke locater tabs and the fit perfectly in the wheel. I am trying to get the look of a 14 in 69 and up style Magnum 500 wheel with the factory trim ring but in a 15 inch one piece cast wheel. I think that I pulled it off.

View attachment 1871497

View attachment 1871498

View attachment 1871499

View attachment 1871501

View attachment 1871505

My heavens , works been so busy I forget what day it is . Well here’s one of the greatest wheels Made

 

[Dave6T4]

I had to do the same thing on my wheels. A step drill worked great for this.

 

[chargervert]

I had to do the same thing on my wheels. A step drill worked great for this.

Cool,I have one of those! Thanks

 

[Hey-O]

 

[Coelacanth]

View attachment 1871519

Cool pic...wheels within the wheel.

 

[Charles Cook]

Cool pic...wheels within the wheel.

I thought it was cool also. That’s a reflection of my truck wheels on my wife’s wheels in the garage one day.