Wheel Wednesday

[66ChargerHI-PO]

In honor of the late Bob Renton

 

[66ChargerHI-PO]

 

[66ChargerHI-PO]

 

[Hey-O]

 

[66ChargerHI-PO]

 

[66ChargerHI-PO]

 

[67charger383]

Cragar Starwire 30s

 

[Coelacanth]

View attachment 1946982
Cragar Starwire 30s

Those deep dishes look great on a first-gen Charger. Anything less just looks awkward on them due to the Hugh Jass effect.

 

[BSB67]

 

[Don Frelier]

 

[Budnicks]

Been thinking about these wheels for my truck
but no 6x4.5/114.3
could do it with steel adapters,
it would set the wheels out another 1.250" each side
use the 6x5.5" & 15, 16 or 17" diameter
allegedly it gives you more room for tires
I'm completely skeptical, but like the designs

Canyon Polished 15, 16 or 17 up-to 4.5" BS
they do have them in 5x4.5" (for a MoPar or Ford car bolt pattern)
but BS is minimal choices like 3.73" to 4" on an 8" wheel that'd fit most B-bodies
they also had 15x10" & 15x12" in 5x4.5" but BS is like 3.75", don't think it's fit a car
without rubbing

Canyon Pro Polished 17"x9" 5" BS

Canyon Pro Bronze 17x9" 5" BS

Canyon Pro Satin Black

 

[mmissile]

 

[Charles Cook]

 

[Budnicks]

 

[67charger383]

View attachment 1947054

I’m a wheel guy and I’ve never seen those? Possibly unfinished Motor Wheel flys?

 

[66ChargerHI-PO]

 

[thehemikid]

When you almost forget the valve stem.

 

[Coelacanth]

Been thinking about these wheels for my truck
but no 6x4.5/114.3
could do it with steel adapters,
it would set the wheels out another 1.250" each side
use the 6x5.5" & 15, 16 or 17" diameter
allegedly it gives you more room for tires
I'm completely skeptical, but like the designs

Canyon Polished 15, 16 or 17 up-to 4.5" BS
they do have them in 5x4.5" (for a MoPar or Ford car bolt pattern)
but BS is minimal choices like 3.73" to 4" on an 8" wheel that'd fit most B-bodies
they also had 15x10" & 15x12" in 5x4.5" but BS is like 3.75", don't think it's fit a car
without rubbing
View attachment 1947040
Canyon Pro Polished 17"x9" 5" BS

View attachment 1947039


Canyon Pro Bronze 17x9" 5" BS
View attachment 1947041
Canyon Pro Satin Black

View attachment 1947042

I like that first one (Canyon Pro Polished) best. I'd avoid the others with the fake beadlock bolts because you'll be needing a toothbrush to clean the crud that accumulates in each and every one of those holes.

 

[Triplegreen500]

I like that first one (Canyon Pro Polished) best. I'd avoid the others with the fake beadlock bolts because you'll be needing a toothbrush to clean the crud that accumulates in each and every one of those holes.

I never understood the fascination with the fake beadlock bolts...I think they look like crap, AND they're a pain in the *** to keep clean. I was looking for rims for my 2001 Ram 2500 a while back, and everything I found had those stupid bolts on them. I ended up going with gen3 Ram factory wheels....

 

[67charger383]

Ion Alloy 167s on my F-350